Reservato Partner Program

No tools are required. All devices are designed for simple, non-invasive installation using either a peel-and-stick adhesive or cable tie, depending on the device type.

Each device is clearly labeled on delivery.

• Adhesive models come with a peel-off backing revealing a sticky surface.
• Cable tie models have built-in slots for securing with the included ties.

If you're unsure, refer to the packing label or the quick-start guide provided in the box

Choose a spot that is:

• Visible to users
• Unobstructed during normal use
• Easily accessible for scanning or visibility
• Safe from regular contact or cleaning sprays
• Agree location with client

Yes – for adhesive models, make sure the mounting surface is relatively flat and clean, and large enough to accommodate the 25mm diameter of the device.
Cable tie models are more forgiving and can be secured around non-flat or rounded surfaces.

• Clean the surface with a dry cloth to remove dust or debris.
• Remove grease or oil using a suitable cleaning agent.
• Ensure it's dry and smooth.
• Peel off the backing and press firmly for a few seconds to ensure a secure bond. this item. Bond will strengthen over 24 hours

In that case, use the cable tie model, which is ideal for uneven, curved, or mesh frames. Let us know your needs during ordering so we send the correct variant.

Approximately 1 minute per lounger.
The process is quick and straightforward, with minimal preparation required.